SAFETY TRAINING COURSES

8hr – $250

The course is designed for senior safety professionals responsible for the implementation and instruction of their employer’s fall prevention programs. The coaching and mentoring skills taught are reinforced using scenarios that contextualize the instruction within the appropriate fall protection standard and industry best practices. 

Disclaimer: This presentation was produced under grant number SH-31236-SH7 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

30hr – $595

Core Compliance is a standardized program covering the health, safety, and environmental training most requested by oilfield operators and other host employers. It is an instructor-led training that, in addition to being SafeLandUSA and SafeGulf accredited, provides training level certificates beyond the awareness level for more than 30 selected topics. The classroom presentation is designed to build on common content in a high intensity 3-day format.

The Core Compliance training program will ensure your employees are trained in the safety topics commonly required by operators in their pre-qualification surveys and training matrices:

• Access to Employee Exposure & Medical Records
• Asbestos Awareness
• Benzene
• Bloodborne Pathogens
• Fire Protection/ Prevention/ Control
• Hazardous Waste Operations and Emergency Response
• Hearing Conservation/Protection
• Lead Awareness
• Respiratory Protection
• And more...

8hr – $250

This course is designed to help new leaders bridge the gap between knowing how to get the job done and how to effectively guide others in completing the job. Participants will engage in active scenario-based learning as they practice adapting their leadership style to increase effectiveness of his or her communication styles. They will practice proven techniques in communicating, motivating and inspiring a diverse workforce to achieve the desired balance of worker safety, quality work, and production outcomes in the upstream oil and gas industry. Course modules include: interpersonal behaviors; developing worker potential; problem solving and conflict resolution; process improvement skills; job planning; and simultaneous operations. 

The industry steering committee responsible for the development of the OSHA 5810 has developed this course specific to the needs of supervisors and managers in the oil patch.

4hr – $175

This course will give supervisors from all industries valuable training on the management of drug and alcohol abuse in the workplace. Supervisors will learn what they need to look for, and actions to take if someone seems unfit for duty. In addition to learning how to perform reasonable suspicion/cause testing, they will also learn WHY it is important to do so. Other topics include: important elements of a comprehensive substance abuse policy, and the greatest risk categories for drug and alcohol abuse among worker populations. This information will help reduce overall risk in the workplace by assisting supervisors in maintaining a proactive approach to drug and alcohol use among employees. Course meets US DOT training requirements. Each attendee will receive a copy of the 2019 Drug Identification Guide.

4hr – $175

When exposed to crystalline silica, workers are at increased risk of developing silicosis, lung cancer, chronic obstructive pulmonary disease, and kidney disease. This course will train employers and employees on the hazards related to exposure. Attendees will learn how to stay in compliance with OSHA’s Respirable Crystalline Silica standard for Construction (1926.1153) and the steps required to protect themselves and their employees. 

Upon course completion, students will understand the importance and duties of a competent person in silica producing activities and have the knowledge and skills required to perform these duties.

8hr – $250

This course is designed to meet the requirements for Riggers and Signalpersons to be qualified under the new rule, 29 CFR 1926, Subpart CC. The course will address safe rigging practices and procedures, methods to calculate sling loading, ASME hand and voice signals, ASME responsibilities of signalpersons, and more. Each participant receives the Crane Institute’s Rigging Book, rigging quick card, and signaling cards. This course is classroom only and does not include hands on activities. Attendees will need to be evaluated on their equipment in their work environment by the employer as per OSHA 1910.

Upon course completion, students will understand the importance and duties of a competent person in rigging and signal work and have the knowledge and skills required to perform these duties.

4hr – $175

This course is designed to provide Federal, State MCSAP and local law enforcement personnel with the basic knowledge, skills, practices, and procedures necessary for performing vehicle inspections under the Motor Carrier Safety Assistance Program. Referred to as North American Standard Inspections, the course will focus on understanding federal regulations and applying them during a safety inspection of commercial motor vehicles.

8hr – $250

This course is designed for overhead crane and hoist operators. Participants learn safe operating procedures and daily inspections which form a consistent approach to crane safety. The training program is specifically designed to upgrade the existing knowledge and skill levels of experienced operators, trainees, safety personnel, inspectors, maintenance personnel, managers and supervisors.

The information provided in this 8-hour program includes classroom training reinforced with hands-on and practical application on the use of the host facilities overhead crane(s). All personnel attending this program will gain significant and useful skills and will leave with a stronger understanding and appreciation of the requirements and responsibilities of Overhead Crane Operators.

The program instruction will also include safe operating practices, proper load handling, basic rigging, pre-use inspection and accident avoidance. The instructor places emphasis on informing the operator(s) on the interaction of overhead crane components which makes an operator better able to provide early detection of unsafe conditions.

4hr – $175 (Construction Industry) 

When elimination, substitution, engineering, and administrative controls are not feasible or do not provide sufficient protection, employers must provide personal protective equipment (PPE) to their employees and ensure its use. Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs), hard hats, respirators and full body suits. Remember, PPE is the last resort in hazard control, not the first choice. Some employers may mistakenly believe PPE is the end-all be-all. They might do too much, not too little.

The information in this course is general in nature and does not address all workplace hazards or PPE requirements. The information, methods and procedures in this course are based on the OSHA requirements for PPE as set forth in the Code of Federal Regulations (CFR) for general industry in the following OSHA 29 CFR 1910, Subpart I, Personal Protective Equipment.